Scott Heavy Duty Tab Cutte Instruction Manual page 41

4 Maintenance
Fig. 4-3. Lubricator
Fig. 4-4. Adjustment Screw
4- -4
Recommended Oil: Mobil DTE24 or Equivalent.
C
CAUTION
Note !
With the oil feed clearly seen through the
sightdome (C) in the lubricator, it is possible to
adjust the oil feed to the proper amount of
lubrication. The principle of oil "misting" in
conjunction with the integral automatic by--pass
valve, eliminates the possibility of flooding the
equipment.
The Oil Adjustment Screw (D) in the top head of
the lubricator unit may be opened for full flow
(counter--clockwise) or closed completely
(clockwise).
D
The adjustment screw is held captive by the
hold--down ring on the sightdome, preventing the
screw from being backed out all the way.
!
DO NOT USE DETERGENT OIL;
This type of oil will quickly ruin the
rubber parts in the air cylinder.
USE LIGHT WEIGHT
NON- DETERGENT OIL ONLY. Use
machine oil, spindle oil or mineral oil
only.
DO NOT USE AUTOMOBILE OIL.
Heavy Duty Tab Cutter Issue 1