Cutting Speed Of Knives 3 - Scott Heavy Duty Tab Cutte Instruction Manual

3 Operation
Fig. 3-27. Find Position For Feed Guide
Fig. 3-28. Adjustment for Knife Speed
3- -14
A
Step: 2. Insert a sheet of paper into the cutting
area to find the proper position for feed
guide (A).
Step: 3. Slide the table horizontally so that the
edge of the feed guide is flush with the
sheet edge.
Step: 4. Tighten the two pinch lock handles.
3.4.7 Cutting Speed of Knives
There is a needle valve under the machine in the
center of the machine. If the knives rotate with too
much or too little speed, you can adjust the speed
with this needle valve.
Heavy Duty Tab Cutter Issue 1