Fig. 1-3. Table Safety Switch
Fig. 1-4. Knife Guard Switch
Fig. 1-5. Turn Machine Off Before Making
Adjustments
Heavy Duty Tab Cutter Issue 1
1.3.2
1.3.3
A
The machine is equipped with two safety switches.
The table switch (A) is located below the table on
the machine base. The knife guard switch (B) is
located on the base.
When either the table is tilted forward or the knife
guard is open, contact with the switch is broken
and the machine's main power is disabled.
Once switch contact is broken, it is not necessary
to reset the machine. Machine power is
automatically restored when the table is tilted back
into its correct upright position or the knife guard is
closed.
B
1.3.4
If machine is to be shut down for adjustments or
repairs, turn the power supply to the machine off.
1 Introduction & Safety
Machine Safety Features
Safety Switches
Main Power Switch
1- -7