Operator's Controls; Control Panel Layout - Scott Heavy Duty Tab Cutte Instruction Manual

3 Operation
3.2

Operator's Controls

3.2.1

Control Panel Layout

Fig. 3-1. Operator's Control Panel
Fig. 3-2. Power On/OFF Selector Switch
Fig. 3-3. Machine Mode Selector Switch
3- -4
3.2.2 Power On/OFF Selector Switch
OFF -- Turns Power off to the machine.
ON -- Brings power to the machine.
3.2.3 Machine Mode Selector Switch
This selector switch determines the operational
mode of the machine.
AUTO -- When the selector switch is in the Auto
mode, the tab cutting blades will operate when a
sheet is inserted into the cutting area. By inserting
a sheet into the cutting area, contact is made with
a switch activating the blades to cut one tab.
OFF -- Tab cutting blades cannot be activated in
this mode.
MANUAL -- When the switch is in this position, the
switch in cutting area is bypassed allowing the tab
cutting operation to be performed using the foot
pedal.
Heavy Duty Tab Cutter Issue 1