2 Installation
2.1
Installation Requirements
Fig. 2-1. Scott Heavy Duty Tab Cutter on Shipping Skid
All procedures in this section provide advance planning and site preparation data for installation of the Scott
Heavy Duty Tab Cutter. Environmental requirements, unpacking instructions, electrical and physical
specifications are included. This information should be used as a reference during the development of site
preparation plans before you install your machine.
If any questions arise while performing any of the following procedures, contact:
Note !
A forklift is required to lift the machine off the shipping skid and place it on the floor.
Heavy Duty Tab Cutter Issue 1
2- -3