To Adjust Knives For Different Tab Length 3 - Scott Heavy Duty Tab Cutte Instruction Manual

Fig. 3-18. Tab Length
Fig. 3-19. Loosen Mounting Screws on Small
Stationary Knife
Fig. 3-20. Loosen Mounting Screws on Small
Stationary Knife
Heavy Duty Tab Cutter Issue 1
3.4.4 To Adjust Knives for Different
Tab Length
It is very simple to change the tab length since only
the short knives must be moved. The long knives
are never adjusted when changing tab length. To
adjust the short knives, do the following:
Step: 1. Loosen the two screws holding the small
stationary knife so that it can slide from
left to right or vice versa. Do not remove
the screws, just loosen.
Step: 2. Loosen the two bolts at the back of the
casting holding the small rotating knife so
that you can slide the entire unit to the
position on the steel arbor to the position
you want. Do not remove screws, just
loosen.
3 Operation
3- -11