Miele EVS 6214 Operating And Installation Instructions page 48

Building in the drawer

Risk of injury!
The drawer is heavy and will tip for-
wards when open.
Installation must be carried out by
two people.
Keep the drawer closed until the
anti-tipping mechanism supplied has
been fitted to the side walls of the
housing unit.
Check that the base that the drawer
will sit on is clean and level (use a
spirit level). This is important for the
appliance to function correctly.
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
Fitting the anti-tipping mechanism
 Measure the distance to the right and
left hand side walls of the housing
(see illustration).
 Mark the uppermost position in the
long slot of the anti-tipping mechan-
ism . Make sure that the anti-tip-
ping mechanism is flush with the
base of the housing unit.
 Secure the anti-tipping mechanism to
the right and left hand side walls of
the housing unit with the 4 screws
supplied (4 x 16 mm).
Installation
47