Sealing The Bag Early - Miele EVS 6214 Operating And Installation Instructions

Operation
After the vacuuming process
An acoustic tone will sound.
 Open the glass lid.

Danger of burning!
The sealing bar and weld seam are
hot.
Do not touch the sealing bar or the
weld seam immediately after the va-
cuuming process.
 Remove the vacuum sealing bag from
the vacuum chamber.
Before starting a new vacuuming
process, check that the vacuum
chamber and the sealing bar are
clean and dry.
Remove any soiling or liquid residues
if necessary.
22
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.

Sealing the bag early

You can end the vacuuming process
before reaching the selected vacuuming
level and seal the bag early.
 Touch the  sensor.
The vacuum process stops. After a few
seconds the bag will be sealed.
Successful sealing of the bag is only
possible when there is a minimum va-
cuum (vacuum level 1) in the chamber.
Touch the  sensor again if the re-
quired vacuum level has not yet been
reached. For technical reasons, a few
seconds will elapse before the bag is
sealed.