Graphics, Custom Store - SATO CX200 Programming Manual

Expanded Memory Function

Graphics, Custom Store

Command Structure
Command Function
Printer Input
Printer Output
Special Notes
SATO CX200 Printers
<ESC>GIabbbcccddd{data}
a = Specifies character format of the data
H Hex data
B Binary data
bbb = Number of horizontal 8 x 8 blocks (001 to104)
ccc = Number of vertical 8 x 8 blocks (001 to178)
ddd = Graphics storage number (001 to 099)
{data}= Hex or binary data to describe the graphic image
Example: See Appendix C for detailed information on creating Hex
and Binary graphic files.
Placement: Immediately following the <ESC>CC Memory Area Select
command.
Default: None
To provide similar functionality to the <ESC>G Custom Graphic
command (see Page 41), but allows for the graphic image to be
stored in a Expanded Memory. Use the Store command to send the
graphic data to the printer, which is held in the optional Expanded
Memory, even if printer power is lost.
<ESC>A
<ESC>CC1<ESC>GIH002002001
0100038007C00FE01FF03FF87FFCFFFE07C007C007C007C007C007C007C007C0
<ESC>Z
Note: See Appendix C for detailed explanation on how to format a graphics data
stream.
There is no printer output as a result of this command. See
<ESC>GR Recall Custom Graphics command.
1. You must have the optional Expanded Memory to use this
command. Call your SATO representative for details.
2. The maximum storage capacity is 999 graphics, up to the capacity
of the memory expansion.
3. Each graphic to be stored must be sent in its own data stream.
PN 9001055 Rev. E
CX200 Programming Guide
Page 73