Transmission Shift Levers - Taylor-Dunn TC-30 Operator's Manual

Transmission Shift Levers

This section covers mechanical operation of each shifter only. Refer to the Driving section in this
manual for details on correct use of the shift lever.
WARNING
Shift levers without a Park position do not have a parking lock function in the transmission.
Always set the park brake before leaving the driver seat. Failure to set the park brake
may result in unexpected movement of the vehicle causing severe bodily injury and/or
property damage.
Depending on your vehicle configuration it may be equipped with one of three types of shifters:
F-N-R Shifter
The F-N-R shifter has 3 positions:
• F: All forward gears.
• N: Neutral.
• R: Reverse
To select a direction of travel, pull the shift lever
towards the left and push forward for reverse or pull
back for forward.
Full Range Shifter with Park
The full range shifter with Park has 6 positions:
• P: Park.
• R: Reverse.
• N: Neutral.
• D: All forward gears.
• 2: Gears 1 and 2.
• 1: Gear 1 only.
To select a direction of travel or gear, pull the shift
lever towards the left and push or pull the lever into
the desired direction or gear.
Full Range Shifter without Park
The full range shifter without Park has 6 positions:
• R: Reverse.
• N: Neutral.
• D: All forward gears.
• 3: Gears 1 through 3.
• 2: Gears 1 and 2.
• 1: Gear 1 only.
To select a direction of travel or gear, pull up on the release
lever under the knob and push or pull the lever into the desired
direction or gear.
Page 22 Tiger TC-3060 Operator Manual
MT-030-60-E