Led's - Carefree ECLIPSE Owner's Manual

LED'
S
White (monotone) LEDs are a popular option providing lighting beneath the
awning. Factory installed LEDs are located on the roller tube or can be mounted
at the awning rail.
The BT12 Control System provides controls to allow you to set the lights to
match your preference with ON/OFF and dimming controls through the Carefree
Connects Mobile App and/or the BT Remote.
To operate the White LED lights, you must have the LED
power switch ON.
Some OEMS may furnish their own switch that may
NOTE:
appear differently than the switch pictured or may have
the LED's operated through a multiplexing control center.
The factory default for the lights is full bright. When the
light is adjusted with the BT Remote or the mobile app, the
system will remember the setting for the next time the
lights are turned on.
A feature of the Carefree Connects Mobile App can be enabled to shut the LED
lights off when the awning is retracted (closed). This is a safety feature to
prevent the lights from being accidentally left on when the awning is retracted.
The "LED Rollup" setting can be enabled/disabled with the Carefree Connects
Mobile App.
RGB (Color) LEDs
Select OEMs may offer RGB LEDs. These are
Control System.
These lights use a separate IR (Infrared) remote and sensor. The top of the
remote must be pointed at the infrared sensor on the LED receiver module.
The remote control provides:

Simple push button on/off

Adjustable dimming

15 color choices + white

Special effects
(flash, strobe, fade and smooth)
controlled through the BT12
NOT
Dim
R G
Color
Select
E BT12
CLIPSE WITH
OFF/ON
OFF ON
B W
FLASH
Special
STROBE
Effects
FADE
SMOOTH
LEDRGB003
9