Table of Contents
Advertisement
Carefree of Colorado
LED'
S
White (monotone) LEDs are a popular option providing lighting beneath the
awning. Factory installed LEDs are located in the lead rail.
The BT12 Control System provides controls to allow you to set the lights to
match your preference with ON/OFF and dimming controls through the Carefree
Connects Mobile App and/or the BT Remote.
To operate the White LED lights, you must have the awning
lights switch ON.
NOTE: Some OEMS may furnish their own switch that may
appear differently than the switch pictured or may have the
LED's operated through a multiplexing control center.
The factory default for the lights is full bright. When the
light is adjusted with the BT Remote or the mobile app, the
system will remember the setting for the next time the lights
are turned on.
RGB (Color) LEDs
Select OEMs may offer RGB LEDs. These are
Control System.
These lights use a separate IR (Infrared) remote and sensor. The top of the
remote must be pointed at the infrared sensor on the LED receiver module.
The remote control provides:
Simple push button on/off
Adjustable dimming
15 color choices + white
Special effects
(flash, strobe, fade and smooth)
8
controlled through the BT12
NOT
Dim
R
G
Color
Select
OFF/ON
OFF
ON
B
W
FLASH
Special
STROBE
Effects
FADE
SMOOTH
LEDRGB003
Advertisement
Table of Contents
