Turning Display Lock Off And On; Selecting Temperature Units - Hach sensION3 Instruction Manual

SECTION 3,
continued

3.1.2 Turning Display Lock Off and On

3.1.3 Selecting Temperature Units

Setup 2 is the Display Lock option. This feature stops
measurement reading fluctuation on the display once a stable
reading is reached. The default setting is Off.
When this feature is not used, the measurement value may
continue to fluctuate.
1. From the reading mode, press
2. The icon and the number
Setup
Press the up arrow once so the Setup number is
3. Change the Display Lock status by pressing
toggles the Display Lock between off and on. When the
Display Lock is disabled, the Display Lock icon and
displayed. When this feature is enabled, the Display Lock
icon is displayed and three beeps occur when the stabilization
criteria are met.
4. When the desired option is selected, press
the reading mode.
1. From the reading mode, press
2. The icon and the number
Setup
Press the up arrow twice so the Setup number is
3. Change the temperature unit by pressing
toggles the temperature units between °C and °F. The default
is °C.
4. When the desired option is selected, press
the reading mode.
24
.
SETUP
(flashing) will be displayed.
1
.
2
ENTER
to return to
EXIT
.
SETUP
(flashing) will be displayed.
1
.
3
; this key
ENTER
to return to
EXIT
; this
are
Off