Setting The Time; Setting The Month And Day - Hach sensION3 Instruction Manual

SECTION 3,
continued

3.1.6 Setting the Time

3.1.7 Setting the Month and Day

1. From the reading mode, press
2. The icon and the number
Setup
Press the up arrow until the Setup number is
3. Change the time by pressing
change to
_ _:_ _,
numerical keypad will become active.
4. Press the desired number key for the left most digit. The
meter uses a 24-hour military clock (12 a.m. = 00:00; 1 p.m.
= 13:00). All four digit places must have a number. If the left-
most digit(s) is not necessary, use zero for the value (i.e.,
08:15 for 8:15 a.m. or 00:30 for 12:30 a.m.).
5. Once a number key is pressed, the next digit place holder will
flash. Continue to enter the desired numbers until all four
places have a value. Press
occurs, start over by pressing
6. When the desired option is selected, press
the reading mode.
1. From the reading mode, press
2. The icon and the number
Setup
Press the up arrow until the Setup number is
will show and
Date
3. Change the date by pressing
change to
_ _/_ _,
format has two places for the month on the left side of the
slash and two places for the day of the month on the right side
of the slash.
4. The numerical keypad will become active. Press the desired
number key for the left most digit. All four digit places must
have a number. If the left-most digit is not necessary, use zero
for the value (i.e., 02/06 is February 6).
26
.
SETUP
1 (flashing)
. The main display will
ENTER
with the left place holder flashing. The
. If a number entry error
ENTER
SETUP/CE
.
SETUP
1 (flashing)
near the bottom of the display.
a date
. The numeric display will
ENTER
with the left place holder flashing. The date
will be displayed.
.
6
.
to return to
EXIT
will be displayed.
. The display
7