Hach sensION3 Instruction Manual page 17

SECTION 1,
continued
Item No. Description
1 Indicates meter is in Calibration mode. If the
necessary.
2 Indicates meter is in Calibration Review mode.
3 Indicates data is being sent to a printer/computer.
4 Indicates recalled data that is currently displayed is being erased.
5 Indicates meter is in Setup mode.
6 Indicates all data points are being printed or erased.
7 Numerical field that displays Setup, Sample.pH average, and Standard numbers when
those words are displayed with the number. If
measuring Standard 1.
?
8 Flashing
EXIT key.
9 Indicates the meter is measuring a sample (sample number is displayed to the right).
10 Indicates the meter is measuring a standard (standard number is displayed above).
11 Indicates the displayed number is the electrode slope.
12 Numerical field that displays the slope and pH or mV values of standards and samples.
13 Indicates measurement units (pH or mV).
Default
14 When
temperature correction for the pH value.
15 Temperature units (choice of °C or °F).
16 Indicates value displayed in small numerical field (item 17) is in millivolts.
17 Numerical field that displays temperature value, or pH offset in Calibration Review.
18 Indicates meter is using AC power.
19 Indicates an inactive key has been pressed and that function is not allowed.
20 Indicates ENTER key is active.
21 Indicates arrow keys are active.
22 In Setup mode, it indicates the date is being set.
23 Indicates EXIT key is active.
24 NA
25 Indicates numeric part of the key is active.
26 Display Lock icon. Displayed with item 27.
27 Indicates whether Display Lock is
28 Faulty probe connection or incorrect probe attached. Usually displayed with an error code.
May also indicate a low slope.
29 NA (low battery icon)
30 Indicates a meter function problem.
Table 2 Main Display Elements
CAL
and indicate calibration is necessary. Also a prompt to press the ENTER or
is displayed, the meter is using the default temperature value to calculate the
?
is flashing, it indicates calibration is
Standard
On Off
or .
17
1
and are displayed, the meter is