Installation Results; Installation Logging; Openibd Script; Table 13: Installation Results - Mellanox Technologies ConnectX-5 Ex User Manual

The list of the modules that will be loaded automatically upon boot can be found in the
infiniband/openib.conf

4.1.3.3 Installation Results

Table 13 - Installation Results
Software
Firmware
4.1.3.4 Installation Logs
While installing MLNX_OFED, the install log for each selected package will be saved in a sepa-
rate log file.
The path to the directory containing the log files will be displayed after running the installation
script in the following format:
"Logs dir: /tmp/MLNX_OFED_LINUX-<version>.<PSID>.logs"
Example:
Logs dir: /tmp/MLNX_OFED_LINUX-4.4-1.0.0.0.IBMM2150110033.logs

4.1.3.5 openibd Script

As of MLNX_OFED v2.2-1.0.0 the
This can be controlled by setting the variables below in the
file.
OPENIBD_PRE_START
OPENIBD_POST_START
OPENIBD_PRE_STOP
OPENIBD_POST_STOP
Rev 1.7
file.
• Most of MLNX_OFED packages are installed under the "/usr" directory except for the follow-
ing packages which are installed under the "/opt" directory:
• fca and ibutils
• The kernel modules are installed under
• /lib/modules/`uname -r`/updates on SLES and Fedora Distributions
• /lib/modules/`uname -r`/extra/mlnx-ofa_kernel on RHEL and other RedHat like Distribu-
tions
• The firmware of existing network adapter devices will be updated if the following two condi-
tions are fulfilled:
• The installation script is run in default mode; that is, without the option '--without-fw-
update'
• The firmware version of the adapter device is older than the firmware version included with
the Mellanox OFED ISO image
Note: If an adapter's Flash was originally programmed with an Expansion ROM image, the
automatic firmware update will also burn an Expansion ROM image.
• In case that your machine has an unsupported network adapter device, no firmware update will
occur and the error message below will be printed.
The firmware for this device is not distributed inside Mellanox
driver: 0000:01:00.0 (PSID: IBM2150110033)
To obtain firmware for this device, please contact your HW ven-
dor.
openibd
Mellanox Technologies
.
script supports pre/post start/stop scripts:
/etc/infiniband/openibd.conf
Driver Installation
/etc/
33