Online Update - Mellanox Technologies ConnectX-5 Ex User Manual

The directory contents should appear as follows:
This location should be specified for DriversPath property when injecting driver into the
Nano server image:
.\InjectingDrivers.vhdx -DriversPath C:\WS2016TP5_Drivers
Create the Nano server image.
Step 5.
Follow the instructions in the TechNet article for

4.2.8.2 Online Update

Go to the Mellanox WinOF web page at:
Step 1.
http://www.mellanox.com
Download the driver package.
Step 2.
Extract the Mellanox drivers to a local directory (see
Step 3.
out Running Installation", on page
Open a remote connection to the Nano server.
Step 4.
Copy all the driver files to the Nano server
Step 5.
Install the driver:
Step 6.
Rev 1.7
New-NanoServerImage -MediaPath \\Path\To\Media\en_us -BasePath .\Base -TargetPath
=> Products =>Ethernet Drivers => Windows SW/Drivers.
pnputil -I -a <Driver_Folder>\mlx5.inf
When upgrading the driver on a server where the remote connection was done over Mella-
nox device, there will be a loss of connectivity. To upgrade, it is recommended to run a
script that will execute all the required upgrade commands.
Mellanox Technologies
"Getting Started with Nano Server"
Section 4.2.5, "Extracting Files With-
51).
Driver Installation
55