Installation Results; Installation Logging; Table 6: Installation Results - Mellanox Technologies ConnectX-5 User Manual

(InfiniBand only) Run the
Step 5.
InfiniBand link is up. The utility also checks for and displays additional information such
as:
•
•
•
•
•
For more details on
hca_self_test.readme.
After installation completion, information about the Mellanox OFED installation, such as prefix,
kernel version, and installation parameters can be retrieved by running the command
infiniband/info
Most of the Mellanox OFED components can be configured or reconfigured after the installation,
by modifying the relevant configuration files. See the relevant chapters in this manual for details.
The list of the modules that will be loaded automatically upon boot can be found in the
infiniband/openib.conf

4.1.3.3 Installation Results

Table 6 - Installation Results
Software
Firmware

4.1.3.4 Installation Logging

While installing MLNX_OFED, the install log for each selected package will be saved in a sepa-
rate log file.
Rev 1.5
hca_self_test.ofed
HCA firmware version
Kernel architecture
Driver version
Number of active HCA ports along with their states
Node GUID
hca_self_test.ofed
.
file.
• Most of MLNX_OFED packages are installed under the "/usr" directory except for the follow-
ing packages which are installed under the "/opt" directory:
• fca and ibutils
• The kernel modules are installed under
• /lib/modules/`uname -r`/updates on SLES and Fedora Distributions
• /lib/modules/`uname -r`/extra/mlnx-ofa_kernel on RHEL and other RedHat like Distribu-
tions
• The firmware of existing network adapter devices will be updated if the following two condi-
tions are fulfilled:
• The installation script is run in default mode; that is, without the option '--without-fw-
update'
• The firmware version of the adapter device is older than the firmware version included with
the Mellanox OFED ISO image
Note: If an adapter's Flash was originally programmed with an Expansion ROM image, the
automatic firmware update will also burn an Expansion ROM image.
• In case that your machine has an unsupported network adapter device, no firmware update will
occur and the error message below will be printed.
The firmware for this device is not distributed inside Mellanox
driver: 0000:01:00.0 (PSID: IBM2150110033)
To obtain firmware for this device, please contact your HW ven-
dor.
Mellanox Technologies
utility to verify whether or not the
, see the file docs/readme_and_user_manual/
Driver Installation
/etc/
/etc/
27