Mcx516A-Ccat Specifications; Table 28: Mcx516A-Ccat Specification Table - Mellanox Technologies ConnectX-5 Ex User Manual

7.8

MCX516A-CCAT Specifications

Table 28 - MCX516A-CCAT Specification Table
Physical
Protocol Support
Power and
Environmental
Regulatory
a. Typical power for ATIS traffic load.
b. For both operational and non-operational states.
Rev 1.7
Size: 2.71 in. x 5.6 in. (68.90mm x 142.24 mm) – low profile
Connector: Dual QSFP28 (copper and optical)
Ethernet: 100GBASE-CR4, 100GBASE-KR4, 100GBASE-SR4, 56GBASE-R4, 550G
Ethernet Consortium, 40GBASE-CR4, 40GBASE-SR4, 40GBASE-LR4, 40GBASE-
ER4, 25GBASE-CR/CR-S, 25GBASE-SR, 25GBASE-LR, 25G Ethernet Consortium,
10GBASE-SR, 10GBASE-LR, 10GBASE-ER, 10GBASE-CX4, SGMII, 1000BASE-X
Data Rate: 1/10/25/40/50/100 Gb/s– Ethernet
PCI Express Gen3: SERDES @ 8.0GT/s, 16 lanes (2.0 and 1.1 compatible)
Note: PCIe 3.0 x16 bus can supply a maximum bandwidth of 128Gb/s only (=16 * 8GT/
s, including overhead), and therefore cannot support 200Gb/s when both network ports
of MCX516A-CCAT run at 100Gb/s.
Voltage: 12V
Power Cable
a Passive Cables
Typical Power
Passive Cables
1.5W Active Cables
Maximum Power
2.5W Active Cables
Maximum power available through QSFP28 port: 5W
Operational
Temperature:
Non-operational
Humidity: 90% relative humidity
Airflow: See Airflow Specifications on page 71
Safety: CB / cTUVus / CE
EMC: CE / FCC / VCCI / ICES / RCM
RoHS: RoHS Compliant
Mellanox Technologies
16.2W
19.0W
22.3W
24.6W
0°C to 55°C
-40°C to 70°C
b
Specifications
70