Table of Contents
Advertisement
Small Form-factor Pluggable (SFP) transceiver
A component that enables Fibre Channel duplex communication between storage array devices. SFP transceivers
can be inserted into host bus adapters (HBAs), controllers, and environmental services modules (ESMs). SFP
transceivers can support either copper cables (the SFP transceiver is integrated with the cable) or fiber-optic cables
(the SFP transceiver is a separate component from the fiber-optic cable).
Gathering Items
Before you start installing the controller-drive tray, you must have installed the cabinet in which the controller-drive
tray will be mounted.
Use the tables in this section to verify that you have all of the necessary items to install the controller-drive tray.
Basic Hardware
Table 3 Basic Hardware
4
Cabinet
Make sure that your cabinet meets the installation
site specifications of the various E2600 storage
array components. Refer to the Storage System Site
Preparation Guide for more information.
Depending on the power supply limitations of your
cabinet, you might need to install more than one
cabinet to accommodate the different components
of the E2600 storage array. Refer to the installation
guide for your cabinet for instructions on installing
the cabinet.
DE1600 drive tray with end caps that are packaged
separately. This drive tray can be used only with either a
E2612 controller-drive tray or a E2624 controller-drive
tray.
DE5600 drive tray with end caps that are packaged
separately. This drive tray can be used only with either a
E2612 controller-drive tray or a E2624 controller-drive
tray.
DE6600 drive tray (shown with the separately packaged
mounting rails attached). This drive tray can be used
only with a E2660 controller-drive tray.
Item
E2600 Controller-Drive Tray Installation Guide
Included with the
Controller-Drive
Tray
Hide quick links:
Advertisement
Table of Contents
