Things To Know - Leds On The De1600 Drive Tray And The De5600 Drive Tray - NetApp E2600 Installation Manual

NOTE If the Service Action Required (Fault) LED comes on but the Service Action Allowed LED is off for a
particular canister, you might need to service another canister first. Check your storage management software to
determine the action that you should take.
Things to Know – LEDs on the DE1600 Drive Tray and the DE5600 Drive Tray
Figure 98 LEDs on the Left End Cap
Table 26 LEDs on the Left End Cap
Location
1
2
3
4
5
E2600 Controller-Drive Tray Installation Guide
1. Drive Tray Locate LED
2. Drive Tray Service Action Required LED
3. Drive Tray Over-Temperature LED
4. Drive Tray Power LED
5. Drive Tray Standby Power LED
LED Color
Drive Tray Locate White
Drive Tray Service Amber
Action Required
Drive Tray Amber
Over-Temperature
Drive Tray Power Green
Drive Tray Green
Standby Power
On
Identifies a drive tray that you
are trying to find.
A component within the drive
tray needs attention.
The temperature of the drive
tray has reached an unsafe
level.
Power is present.
The drive tray is in Standby
Power mode.
Off
Normal status.
Normal status.
Normal status.
Power is not present.
The drive tray is not in
Standby Power mode.
111