General Operation - Sanyo ECD-T1560 Function Manual

GENERAL OPERATION

LOC/S-MOD
TURNING THE POWER ON........................Any button
When the hidden panel turns up (in State 2), switch on the unit by pressing any button (except
button).
TURNING THE POWER OFF .................................... (1)
When system is on, press the
VOLUME LEVEL CONTROL.......................................(2)
Rotate the VOLUME dial (2) to adjust the volume level.
ADJUSTING THE SOUND
CHARACTERISTICS ...........................................(2), (3)
Press the SEL/SET button (3) shortly:
1. Each time you press the SEL/SET button (3) shortly, the item changes as follows;
VOL
(Volume)
2. Rotate the VOLUME dial (2) to adjust the selected item. Make the adjustment within 5
seconds after selecting. After 5 seconds, the display window will revert to display priority.
BASS (BAS 00)
TREBLE (TRB 00)
BALANCE (BAL L=R)
FADER (FAD F=R)
Beep Sound Adjustment:
Press and hold the SEL/SET button (3) for several seconds to enter beep sound adjustment
mode, then rotate the VOLUME dial (2) clockwise or counter-clockwise to select as follows:
BEEP 2ND
- BEEP 2ND mode:
The beep is only generated when all allowed double function button is pressed for several
seconds.
SEL SET
IR
VOLUME
A-Z/0-9
EQ
MUT MON P .SCN/MP3
1 2
AS/PS
PAU SCN
button (1) to turn off the unit.
BAS TRB
(Bass) (Treble) (Balance) (Fader)
Adjustment Range
BAS –10
TRB –10
10L
10F
BEEP ALL
CAT/DIR
3 4 5 6
MOD
RPT SHF DISC DISC
BAL FAD
BAS 10
TRB 10
10R
10R
BEEP OFF
6
50W x 4
LOUD/ENT/ENT
BAND
DSP
ECD-T1560
SW MANU/SKIP/CH
AUX IN