General Operation - Sanyo FXD-780GD Operating Instructions Manual

GENERAL OPERATION

8
REL
ATP
BAS-X
7
TURNING THE POWER ON ......................................1
Install the front panel and press the POWER MUTE button 1 when ACC is on.
TURNING THE POWER OFF ............................................................. 1
Press the POWER MUTE button for more than 2 seconds. Display will revert to clock indication.
VOLUME LEVEL CONTROL.......................................2
Rotate the VOL dial 2 to adjust the volume level.
MUTING THE SOUND .......................................................................... 1
Press the POWER MUTE button 1 while the receiver is on. While muting the sound, the MUTE indicator
on the display is blinking. To restore the previous volume level, press POWER MUTE button 1
again.
SETTING THE CLOCK ..............................................3
The clock uses a 24-hour display system.
1.
Press the DISP button 3 for more than 2 seconds.
2.
Press the following buttons to set the clock.
VOL dial 2 : Adjust the hour and minutes.
: To activate Hour blink.
: To activate Minute blink.
BAND ATP 8 : Adjust the minutes to zero.
(Example) 12:29 → 12:00
3.
Press the DISP button 3 to activate the clock.
3
FM /AM CD RECEIVER
LO/DX
1
2
LOUD
5
12:30 → 13:00
FXD-780GD 50W x 4
SHF RPT
3 4 5
6
5
2
VOL
TUN TUN
TRK TRK
MUTE
6
AUDIO POWER
4 1