Sanyo ECD-T1560 Function Manual page 2

SIRIUS OPERATION
LOC/S-MOD
SWITCHING TO SIRIUS MODE.............................(1)
Press MOD button (1) to select Sirius mode.
SELECTING USER-PRESET CHANNEL.................(2)
At Sirius mode, the Sirius user-preset channel group (3 groups) is toggled cyclically through the
group by quickly pressing the BAND/LOUD/ENT button (2).
The channel will change in the following order:
SR1
SELECTING CHANNEL UP/DOWN........................(3)
Press the MANU/SKIP/CH
SEARCHING STATION........................................(4)
When the AS/PS/P.SCAN/MP3 button (4) is pressed, the channel searches for each user preset
station from SR1 to SR2 to SR3.
When an available channel is detected, the station will be held at that preset number and play for
5 seconds. After that, it will mute and search for another available station
STORING PRESET STATIONS ..................................(8)
The preset buttons (8) can be used to store 6 stations for convenient access to your favorite
stations.
• Programming stations ..... 1. Select the desired station you want to store in memory.
• Quick tuning .................... Press one of the six preset buttons (8) shortly to select a preset
SEL SET
IR
VOLUME
A-Z/0-9
EQ
MUT MON P .SCN/MP3
1 2
AS/PS
PAU SCN
SR2
or button (3) to select the channel up or down.
2. Press and hold one of the preset buttons (8) for more than 2
seconds until the corresponding preset button number appears.
Repeat steps 1. and 2. to program additional stations.
station directly.
CAT/DIR
3 4 5 6
RPT SHF DISC DISC
SR3
2
50W x 4
LOUD/ENT/ENT
BAND
DSP
ECD-T1560
MANU/SKIP/CH
SW AUX IN
MOD