Table of Contents
Advertisement
COMPUTER INPUT
3
Store
To store manually preset image, move the red frame pointer to
the Store icon and press the SELECT button. The Image Level
Menu will appear. Move the red frame pointer to the Image 1 to
4 where you want to set and then press the SELECT button.
Other icons operate as follows.
Reset
Reset all adjustment to their previous levels.
Quit
Closes the IMAGE MENU.
This projector has a picture screen resize function, which enables you to display the desirable image size.
1
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT button(s) to move the
red frame pointer to the SCREEN Menu icon.
2
Press the POINT DOWN button and move the red frame pointer
to the function that you want to select and then press the
SELECT button.
Normal
Provides image to fit screen size.
True
Provides image in its original size. When the original image size is
larger than the screen size (800 x 600), this projector enters "Digital
zoom +" mode automatically.
Wide
Provides image to fit wide video aspect ratio (16 : 9) by expanding
image width uniformly. This function can be used for providing a
squeezed video signal at 16 : 9.
Digital zoom +
When the Digital zoom + is selected, the ON-SCREEN MENU
disappears and the message "D. Zoom +" is displayed. Press the
SELECT button to expand the image size. And press the POINT
UP/DOWN/LEFT/RIGHT button(s) to pan the image. The Panning
function can work only when the image is larger than the screen size.
A projected image can be also expanded by pressing the D.ZOOM L
button on the Remote Control.
Digital zoom –
When the Digital zoom – is selected, the ON-SCREEN MENU
disappears and the message "D. Zoom –" is displayed. Press the
SELECT button to compress the image size.
A projected image can be also compressed by pressing the D.ZOOM
M button on the Remote Control.
To cancel the Digital Zoom +/– mode, press any button except the
D.ZOOM L/M, SELECT, and POINT buttons.
30
PICTURE SCREEN ADJUSTMENT
SCREEN MENU
Move the red frame to the function and
press the SELECT button.
NOTE
G This SCREEN Menu cannot be operated when
"1035i (HDTV)" or "1080i (HDTV)" is selected in
the PC SYSTEM Menu (P23).
G The Wide cannot be selected when "720p
(HDTV)" is selected in the PC SYSTEM Menu
(P23).
G The True and Digital zoom +/– cannot be
selected when "RGB" is selected in the PC
SYSTEM Menu (P23).
G This projector cannot display any resolution
higher than 1280 X 1024. If your computer's
screen resolution is higher than 1280 X 1024,
reset the resolution to the lower before
connecting projector.
G The image data in other than SVGA (800 x
600) is modified to fit the screen size in initial
mode.
G The panning function may not operate properly
if the computer system prepared in the PC
ADJUST Menu is used.
SCREEN Menu icon
Advertisement
Table of Contents
