Installation
Lens Shift Adjustment
Projection lens can be moved from side to side and up and down with the motor-driven lens shift function. This
function makes the positioning of images easy on the screen.(See page 27)
The display position can be
shifted upward up to 50%
elevation of the display.
When the lens is shifted to top.
The display position can be
shifted to the left in up to
10% width of the display.
When the lens is shifted to leftmost.
Picture Level and Pitch Adjustment
Picture tilt and projection angle can be adjusted with
handles on both sides of a projector. Projection angle
can be adjusted to 5.7 degrees upward.
1
Press the knob on the handle. The handle pops
out.
2
Turn handles (right and left) until picture is
projected on proper position. Rotate rear
adjustable feet to stabilize the projector on a
table.
3
Press the knob and retract the handle.
18
The display position can be
shifted downward up to 50%
low level of the display.
When the lens is shifted to bottom.
The display position can be
shifted to the right in up to
10% width of the display.
When the lens is shifted to rightmost.
LEVEL AND PITCH
ADJUST HANDLE
ADJUSTABLE
FEET
Height of front feet can be adjusted
by turning handles.
REAR ADJUSTABLE
FEET. (Refer to p.10).