Input Source Selection (Computer 2: Rgb); Direct Operation; Menu Operation - Sanyo PLC-XU300 Owner's Manual

Computer Input
Input Source Selection (Computer : RGB)

Direct Operation

Choose Computer (RGB) by pressing the INPUT button on the top control or press the COMPUTER 2 button
on the remote control.
Remote Control

Menu Operation

1
Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point

Use the Point ed
then press the SELECT button.
3
When Computer  is selected, analog RGB input
source will be selected directly.
Note:
✔
When the Input Search function is set to On1 or On,
the input signal will be searched automatically (p.45).
8
COMPUTER  button
Computer (RGB)
ed buttons to select Input and
or the SELECT button.
8
buttons to select Computer  and
Top Control
INPUT button
(Component) / (RGB(Scart))
Input Menu
Computer 1(RGB) /
Computer (RGB)
Video
S-video