Installation; Positioning The Projector; Adjustable Feet - Sanyo PLC-XU300 Owner's Manual

Installation

Positioning the Projector

For projector positioning, see the figures below. The projector should be set perpendicularly to the plane of the
screen.
✔ Note:
• The brightness in the room has a great influence on picture quality. It is recommended to limit ambient
lighting in order to obtain the best image.
• All measurements are approximate and may vary from the actual sizes.
4.6' (1.4 m)
Screen Size
(W x H) mm
4 : 3 aspect ratio
Zoom (max)
Zoom (min)

Adjustable Feet

Projection angle can be adjusted up to 12.0 degrees with
the adjustable feet.
Lift the front of the projector and press the feet lock latches
on both side of the projector.
Release the feet lock latches to lock the adjustable feet and
rotate the adjustable feet to a proper height, and tilt.
Keystone distortion can be adjusted automatically with the
Auto setup function or manually by using the remote control
or the menu operation (see pages 23, 45-46).
34.8' (10.6 m)
23.2' (7.1 m)
17.4' (5.3 m)
11.6' (3.5 m)
150
100
125
40
83
40" 100"
813 x 610 2032 x 1524
4.6' (1.4 m) 11.6' (3.5 m)
5.5' (1.7 m) 13.9' (4.2 m)
41.8' (12.7 m)
200
167
150" 200"
3048 x 2286 4064 x 3048
23.2' (7.1 m)
17.4' (5.3 m)
27.8' (8.5 m)
20.9' (6.4 m)
Adjustable Feet
300
250
300"
6096 x 4572
34.8' (10.6 m)
41.8' (12.7 m)
Feet Lock Latches
13