Computer Input; Input Source Selection; (Computer 1: Rgb / Component / Rgb(Scart)) 2 - Sanyo PLC-XU300 Owner's Manual

Computer Input

Input Source Selection (Computer 1: RGB / Component / RGB(Scart) )
Direct Operation
Choose Computer 1(RGB) or Computer 1(RGB(Scart)) by pressing the INPUT button on the top control or
press the COMPUTER 1 button on the remote control.
Before using INPUT button, correct input source should be selected through Menu operation as described
below.
Remote Control
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point

Use the Point ed
3
When Computer 1 is selected, press the Point
access the submenu items. Use the Point
to select the RGB input source and then press the
SELECT button.
Note:
✔
When the Input Search function is set to On1 or On in
the Auto setup function, the input signal will be searched
automatically (p.45).
COMPUTER 1 button
Computer 1(RGB)
Computer 1
(RGB(Scart))
ed buttons to select Input and
or the SELECT button.
8
buttons to select Computer 1.
ed
Top Control
INPUT button
Input Menu
to
8
buttons
Computer
1
Computer 1(RGB) /
(Component) / (RGB(Scart))
Computer (RGB)
Video
S-video
7