Computer System Selection - Sanyo PLC-XU300 Owner's Manual

Computer System Selection

This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, WXGA,
or UXGA with its Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, this
projector automatically detects the signal format and tunes to project a proper image without any additional
settings. (Signal formats provided in this projector are shown on pages 71.)
One of the following messages may appear when:
The projector cannot recognize the connected
Auto
signal conforming to the provided PC Systems.
Auto is displayed on the System Menu box
and the Auto PC Adjustment function works
to display proper images. If the image is not
projected properly, a manual adjustment is
required (pp.31-32).
There is no signal input from the computer.
-----
Check the connection between your computer
and the projector. (See "Troubleshooting" on
page 64.)
The preset system is manually adjusted in the
Mode 1
PC Adjust Menu. The adjusted data can be
stored in Mode 1–5 (pp.31-32).
PC Systems provided in this projector is chosen.
SVGA 1
The projector chooses a proper system provided
in the projector and displays it.
*Mode 1 and SVGA 1 are examples.
Selecting Computer System Manually
PC system can also be selected manually.
1
Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point
8

Use the Point ed buttons to select Systerm and then
press the Point or the SELECT button.
8
3
ed
Use the Point buttons to select the desired system
and then press the SELECT button.
ed buttons to select Input and
or the SELECT button.
PC System Menu
The PC System Menu
Selected system is
displayed.
PC System Menu
Systems in this
dialog box
can be selected.
Computer Input
Customized Mode
(1–5) set in the
PC Adjust Menu
(pp.31-32).
9