Image Adjustment - Sanyo PLC-XU300 Owner's Manual

Computer Input

Image Adjustment

1
Press the MENU button to display the On-Screen
Menu. Use the Point
Adjust and then press the Point
button.

Use the Point
ed
and then press the SELECT button to display the
adjustment dialog box. Use the Point
adjust the setting value.
Contrast
Press the Point 7 button to decrease the contrast; press the
Point 8 button to increase the contrast (from 0 to 63).
Brightness
Press the Point 7 button to decrease the brightness; press
the Point 8 button to increase the brightness (from 0 to 63).
Color temp .
Use the Point 7 8 buttons to select the desired Color temp.
level (XLow, Low, Mid, or High).
white balance (Red)
Press the Point 7 button to lighten red tone; press the Point
8 button to deepen red tone (from 0 to 63).
white balance (Green)
Press the Point 7 button to lighten green tone; press the
Point 8 button to deepen green tone (from 0 to 63).
white balance (Blue)
Press the Point 7 button to lighten blue tone; press the
Point 8 button to deepen blue tone (from 0 to 63).
Sharpness
Press the Point 7 button to decrease the sharpness of the
image; press the Point
of the image (from 0 to 15).
Gamma
Use the Point 78 buttons to adjust the gamma value to
obtain a better balance of contrast (from 0 to 15).
Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then select
yes. All adjustments will return to their previous figures.
34
buttons to select Image
ed
8 or the SELECT
buttons select the desired item
7 8
buttons to
8 button to increase the sharpness
Image Adjust Menu
✔ Note:
• When White balance Red, Green or Blue is
adjusted, Color temp . will change to User.
• When Blackboard(Green) or Colorboard
is selected in Image select, Color temp . will
change to Blackboard or Colorboard.
Selected Image mode
Use the Point
7 8
buttons to adjust the
setting value.