Automated Internal And External Cleaning And Internal And External Disinfection; Automated Drying; Care Products And Systems - Servicing; Packaging - KaVo PROPHYflex 4 Instructions For Use Manual

7 Reprocessing steps in accordance with ISO 17664 | 7.5 Care products and systems - Servicing
Miele Series G 7881/7891
Cover for powder container
Wrench for cannulas
required material:
Reprocessing in Miele sieve bas-
ket
required material:
Reprocessing in Miele sieve bas-
ket
7.4.4 Automated internal and external cleaning and
internal and external disinfection
KaVo recommends washer disinfectors according to EN ISO 15883-1, which
are operated using alkaline cleaning agents having a maximum pH value of 11.
The validation was conducted with a Miele washer disinfector using the
"VARIO-TD" programme, the "neodisher® mediclean forte" cleaning agent, the
neodisher® Z" neutralisation agent and the "neodisher® mielclear" rinsing
agent.
▶ For programme settings as well as cleansers and disinfectants to be used,
please refer to the Instructions for Use of the washer disinfector.

7.4.5 Automated drying

The drying procedure is normally part of the cleaning program of the thermod-
isinfector.
Note
Please observe the instructions for use of the thermodisinfector.
▶ In order to prevent impairment of the KaVo medical device, make sure that
the inside and outside of the device is dry after the end of the cycle.

7.5 Care products and systems - Servicing

Improper care.
Malfunction or property damage.
▶ Do not clean the PROPHYflex with oils or care spray.

7.6 Packaging

Note
The sterilisation bag must be large enough for the instrument so that the bag
is not stretched.
The quality and use of the sterilisation packaging must comply with applic-
able standards and be suitable for the sterilisation procedure!
▶ The medical device must be packed before sterilisation.
NOTICE
27 / 34
Instructions for use PROPHYflex 4