Operation; Attaching The Medical Device; Remove The Medical Device; Filling The Powder Container - KaVo PROPHYflex 4 Instructions For Use Manual

Air polishing device
Table of Contents

Advertisement

5 Operation

Note
At the beginning of each workday, the water-conducting systems should be
rinsed for at least 2 minutes (without transmission handpieces being at-
tached) and if there is a risk of contamination from reflux or back suction, the
system may also need to be rinsed for 20 to 30 seconds after each patient.

5.1 Attaching the medical device

Detachment of the medical device during treatment.
A medical device that is not properly locked can release from the MULTIflex
coupling during treatment.
▶ Before each use, check if the medical device is securely locked onto the
MULTIflex coupling.
▶ Mount the medical device accurately on the MULTIflex (LUX) / MULTIflex
LED coupling and push it backward until the coupling audibly locks in the
medical device.
▶ Check if the medical device is securely seated on the coupling by pulling on
it.

5.2 Remove the medical device

▶ Grasping the coupling, twist the medical device slightly and pull it off.

5.3 Filling the powder container

Open powder container.
Infection hazard from contaminated powder.
▶ Only use original KaVo powder.
▶ Reprocess and refill the powder container before each patient.
▶ Comply with the safety data sheets for KaVo powders.
▶ Safety data sheets are available for inspection at www.kavo.com, "Safety
data sheets".
5 Operation | 5.1 Attaching the medical device
WARNING
CAUTION
15 / 34
Instructions for use PROPHYflex 4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents