D8 (Dio8/Dtr/Slp_Rq); D9 (Dio9/On_Sleep); Lt (Associate Led Blink Time) - Digi XBee User Manual

AT commands
Default
1

D8 (DIO8/DTR/SLP_RQ)

Set or read the DIO8/DTR/SLP_RQ pin configuration (TH pin 9/SMT pin 10).
Parameter range
0, 1, 3 - 5
Parameter
0
1
3
4
5
Default
N/A

D9 (DIO9/ON_SLEEP)

The DIO9/ON_SLEEP pin configuration (pin 13 for through-hole, pin 26 for surface-mount).
Parameter range
0, 1, 3 - 5
Parameter
0
1
2
3
4
5
Default
1

LT (Associate LED Blink Time)

Set or read the Associate LED blink time. If you use the D5 command to enable the Associate LED
functionality (DIO5/Associate pin), this value determines the on and off blink times for the LED when
the device has joined the network.
XBee/XBee-PRO® S2C ZigBee® RF Module
Description
Unmonitored digital input
Input to sleep and wake device
Digital input
Digital output, low
Digital output, high
Description
Disabled
ON/SLEEP output
N/A
Digital input
Digital output, low
Digital output, high
I/O settings commands
246