Page 1
Programming VITALE S Avda. San Silvestre, s/n 31350 Peralta (Navarra) Spain Tel.: +34 948 709 709 www.sat.azkoyen.com...
Page 2
- 2 - PROGRAMMING 1.1. How do we communicate with the machine? The VITALE S machine uses the keyboard of selections to communicate with the user of the machine. The different illuminated buttons indicate the anomalies that it has registered during the service.
- 3 - Order of the buttons Predetermined programming of the machine. It is possible to recover one of the pre- programmings that the machine has stored. These programmings concern the distribution and the configuration of the services. ESPRESSO +2 SOLUBLE VERSION LONG BLACK ESPRESSO...
- 4 - INSTANT VERSION LONG BLACK ESPRESSO WHITE DECCAFF. BLACK CHOCOLATE CAPUCHINO COFFEE W/MILK COFFEE PRESEL. COFFEE España Coffee = Coffee = Coffee = 50 Coffee = 50 X choc = Coffee =45 Portugal X milk = 1.5 X milk = 2.7 0 milk = X milk = 1.9 Francia...
Page 5
- 5 - Volume of the service. As with the temperature, also the volume of the service can be programmed. Touch the selection to changing. Using the buttons 3 ó 4, it will reduce the volume in 50 % or 25 % respectively. Using the buttons 6 ó...
- 6 - The functions are the following ones: Button 1 -> Predetermined programming of the machine Button 2 -> Programming of the temperature of the water in the boiler Button 3 -> programming of the volumes of the services Progr.
Page 7
- 7 - Temperature (the number of winkings, from 1 to 5, indicates the selected variation of the temperature) Number of winkings Temperature Programmed value -10% Programmed value -5% Programmed value Programmed value +5% Programmed value +10% Volume of the service Choose a service: (the number of winkings, from 1 to 5, indicates the selected variation of the volume) Number of winkings...
Page 8
- 8 - 1.4 Programming with payment module. To accede to the programming relative to the payment module, to keep touched the button P during 3 seconds. On the screen of the payment module the first available function appears: F110 With the button 1, decreases the number of function;...
- 9 - 1.5 Brewer cleanning Process and descaling process. Cleaning procedure in Vitale group. Pressing the programming button and then holding down for 3 seconds, this will come in 2nd level of programming. pressing the button 2 the cleaning group function starts. 1.
- 10 - If withing 4sec. is not capable of passing 10 cm3, then the group turns to loading and then to brewing position. 10. 3 espresso coffees are made in a row. leds (O O O O O O O) 2- Process of removing the lime Vitale.
- 11 - 8. Repeat the previous step to make sure it has completely cleared the boiler and tubes.Clean the tank with clean water and run the steps 2 through 6. 1ª 10093 – GB 10 - 2008...