Installing Memory - Supermicro SuperWorkstation 5039C-T User Manual

Installing Memory

1. Push the release tab outwards on the end of
the DIMM slot to unlock it.
2. Align the key of the DIMM module with the
receptive point on the memory slot.
3. Align one end of the DIMM module to the
receptive point on the stationary end of the
slot, and the other end of the DIMM to the
locking end of the slot.
4. Press down on the stationary end of the slot
first, then the locking end until the module
snaps into place.
5. Press the release tab to the locked position
to secure the DIMM module into the slot.
Chapter 3: Maintenance and Component Installation
Release Tab
25
Notches
Press down on the
stationary end first,
the locking end.