Table of Contents
Advertisement
3.3 Motherboard Components
Processor and Heatsink Installation
Follow the procedures in this section to install a processor (CPU) and heatsink onto the
motherboard mounted in the chassis.
Notes:
•
When handling the processor package, avoid placing direct pressure on the label area of
the fan.
•
When receiving a motherboard without a processor pre-installed, make sure that the plastic
protective socket cover is in place and none of the socket pins are bent; otherwise, contact
your retailer immediately.
•
Install the the processor into the socket and the motherboard into the chassis before
installing the CPU heatsink.
•
Use an Intel-certified multi-directional heatsink.
•
Refer to the Supermicro website for updates on CPU support.
Installing the LGA1151 Processor
1. Press the load lever to release the load plate, which covers the CPU socket, from its
locked position.
Load Plate
Load Lever
Chapter 3: Maintenance and Component Installation
19
Advertisement
Table of Contents
