Table of Contents
Advertisement
DG-HR1070MSE User Manual
Charge the battery
Your battery has been partially charged at the factory. If the device indicates a low
charge, do the following:
1. Connect the charger to a wall outlet.
2. Connect the USB charger plug to your device‟s USB port.
3. When the device indicates a full charge, disconnect the charger from the device,
then from the wall outlet.
Tips: Don't plug USB cable or charger during powering on the device; otherwise
it may cause the device to work abnormally. If it occurs at your end, please
restart your device.
Micro SD card slot
On this slot you can insert compatible micro SD card up to 64GB.
Wireless Installation Considerations
The DG-HR1070MSE can be accessed using a wireless connection from anywhere
within the operating range of its wireless network. Keep in mind that the quantity,
thickness and location of walls, ceilings, or other objects that the wireless signals
must pass through may adversely affect wireless signals. Ranges vary depending on
the type of material and background RF (radio frequency) noise in your home or
office. The key to maximizing the wireless range is to follow these basic guidelines:
1. Minimize the number of walls and ceilings between the router and other network
devices. Each wall or ceiling can reduce your adapter‟s range from 3 to 90 feet (1 to
30 meters).
9
Advertisement
Table of Contents
