Digisol DG-HR1070MSE User Manual page 27

Here is the description of every setup item:
Parameter Description
Enable
Check the box to enable the Wi-Fi Protected Setup feature.
Configure State
Shows the current status of the WPS function.
Configure
Select the WPS method that you wish to use. If your device
Method
supports Push Button Connection (PBC), simply select this
option and click Apply to start the connection process. You will
then have 120 seconds to press the WPS button on your
wireless device in order to initiate the connection. If your
device does not support PBC, you can select the PIN method
and continue to the next step.
Click "Apply" to commence the connection process.
3) MAC filter
The wireless clients connected can be allowed or denied to internet access based on
MAC address.
4) Station List
The Station List tab shows a list of all wireless clients currently connected to your
wireless network.
DG-HR1070MSE User Manual
27