Edit Capture Image - Sanyo POA-PN03C Owner's Manual

Chapter 5 Network Capture

Edit capture image

Drawing figures
1
Click " :Pencil" button on the form tool bar.
2
Select its attribute (shape, width, color and translucence) from the form and attribute
tool bar.
3
Drag a mouse pointer on the screen image to draw the figure.
Erase drawn object
1
Click " :Eraser" button on the form tool bar.
2
Select its attribute (shape, width) from the form and attribute tool bar.
3
Drag a mouse pointer on the screen image to erase the figure.
Hints of the drawing
Straight line tool ............ To draw the vertical line or horizontal line, drag a mouse pointer with shift
✐
Square tool ........................ To draw the quadrate rectangle, drag a mouse pointer with shift key
✐
Oval tool ............................. To draw the perfect circle, drag a mouse pointer with shift key pressed.
✐
To cancel the drawing, select command "Edit"-"Undo" from the menu.
✐
To erase all the drawing at once, select command "Edit"-"Delete all" from the menu.
✐
The popup menu appeared by right clicking of the mouse is also available to select the tool and
✐
change the attribute.
Setting of the drawing tool attribute
When clicking "
appear. This window appears only if the pencil or eraser tool is selected.
Sets translucent
color

key pressed.
pressed.
:Attribute" button on the standard tool bar, the following window will
Line width
Large: 8 dots
Medium: 4 dots
Small: 2 dots
Select a color on the
color pallet appeared
by clicking here.