Control By The Web Browser - Sanyo POA-PN03C Owner's Manual

Chapter 5 Network Capture

[2] Control by the web browser

* PC provides the Network Capture.
PC1
PC3
Select input mode to "Network" previously.
1
Access to the control page of the projector by using
the web browser. From the Network menu, click
Capture tab to display the setting page (+ p.37).
2
Select the computer number from the pull-down
menu button of "Connecting PC" and click Start but-
ton. The screen image of the selected computer will
appear on the projected screen in real time.
• To stop capturing, click Stop button. The captured
image of the computer on the screen is frozen.
• To restart capturing, click Restart button.
3
To end capturing, click End button.
The IP address of the connecting PC should be registered previously (+ p.72).
✐
If the error message appears, check item "Parameter set up" (+ p.71).
✐
You can use the capture function by using the web browser or the projector if the Network
✐
Capture 3 software is installed into the computer correctly and its icon stays on the task bar.
7
PC2
Capture
PC4
PC5
PJ2
PJ1
PC6
Project a screen
image of PC1 with
PC2.
* Start capturing of
the PC1 from the
PC5.
Set "On" when
using the wireless
mouse function