Using The Real Time Capture; Registering The Computers - Sanyo POA-PN03C Owner's Manual

Chapter 5 Network Capture

Using the Real Time Capture

This is a function to project the screen image of the computer by the projector in real time.
The captured image projected by the projector can be selected from the computer, web
browser and the projector respectively.

Registering the computers

Up to 30 computers can be registered.
1
Access to the control page of the projector by using the
web browser. From the Network menu, click Capture
tab to display the setting page (+ p.37).
2
Switch to Connection setting page by clicking the
page number tab [3]. Enter the IP address of the com-
puter to the PC number, and then click Set button. Click
Set button to register the IP address for each page.
The registered computer enables to start capturing if only the Network Capture icon appears on
✐
the task bar.
The transfer speed of the captured image using the Real Time Capture function is depending
✐
on the network environment and data volume of the image. For example, when transferring an
image (Computer resolutions and colors: XGA, full color, Picture quality: High), the transfer speed is
about 2 pages per second in maximum. It cannot be supported for movie pictures.
7