Sanyo POA-PN03C Owner's Manual page 103

2
Select "Auto" or "Manual" and then press SELECT button. When selecting "Auto", Set dis-
play time and repeat times
3
Select "Connect" and then press SELECT button to start displaying. The images in the
FTP server are displayed on the screen.
It enables you to browse the images by using the control buttons (▲, ▼ ) on the remote control
✐
or on the projector.
4
To end displaying, select "Disconnect" and then press SELECT button.
Item Description
Auto .......................... Auto display mode. Specifies display periods and repeating times
Sec. .......Display period of the image (3 to 240 sec.)
Times ....repeat times (255 times maximum) *
Manual .................... Manual display mode. Controls image display (browsing image backward or forward)
manually.
In the automatic displaying mode [Auto], when the left-click on the remote control is pressed, pro-
✐
jector stops automatic displaying and sets into the manual displaying mode. When pressing the
right-click, it starts automatic displaying again.
The image data used for this function are the program or folder that the Network Viewer function
✐
used last time. The projector cannot specify particular images or file servers itself.
The display period is greatly affected by the network environment or the operation of multi con-
✐
trol, so it may not display the image as the specified display period.
Using the network viewer function
∞
means endless play
OWNER'S MANUAL [XP57 Series]
10
PJ-NET ORGANIZER