Network Communication Operation And Change Of State - Sanyo POA-PN03C Owner's Manual

Chapter 5 Network Capture

Network Communication operation and change of state

Network Communication can be used under the environment which one or more com-
puters are connected to the projector via the network.
Preparation
Launch the Network Capture 3 software on the target computer (
in the standby or turning on. Check IP address of the target computer is registered in the
connection list (
Operation on the Main PC
z Executing the command "Start Communication".
➔ The capture editing window appears on the
screen. The icon on the task bar is activated.
x Editing the capture image using with the tools.
➔ The editing information is automatically
transferred to the Sub PC.
c Releasing the editing authority.
➔ The color of authority status frame changes green.
➔ The color of authority status frame changes blue.
➔ The editing information on the Sub PC is
reflected on the Main PC.
➔ The color of authority status frame changes green.
v Acquiring the authority.
➔ The color of authority status frame changes red.
b Repeat steps x, c if required.
n Executing the command "Capture transfer".
➔ Updating the editing window with a new
captured screen image.
m Repeat steps x to b.
, Ending the communication.
➔ The capture editing window disappears.
The projector projects the edited captured image on the screen when the input mode of the pro-
✐
jector is set "Network".
The command "Save Communication" can execute in any of the mode even if not having the
✐
authority.
The arrow (➔) shows a response to the command executed.
✐
The execution of the command "End Communication" or "End Editing" on the Sub PC has no
✐
effect on the other target computers.

p.78).
+
Operation on the Sub PC
Frame ➔ The icon on the task bar is activated to
let users know that the captured image is
now serving.
z Executing the command "Start Editing".
R
➔ The capture image on the Main PC
appears on the screen.
➔ The editing information on the Main PC is
R
reflected on the Sub PC.
➔ The color of authority status frame chang-
G
es green.
x Acquiring the authority.
➔ The color of authority status frame chang-
B
es red.
c Editing the captured image using with the
tools.
B
➔ The editing information is automatically
transferred to the target PC.
v Releasing the editing authority.
➔ The color of authority status frame chang-
G
es green.
➔ The color of authority status frame chang-
R
es blue.
b Repeat steps x to v if required.
➔ A new captured screen image appears on
R
the editing window.
R ➔ The capture editing window disappears.
p.70). Set the projector
+
Frame
B
B
G
R
R
G
B
B