How To Enter The Numbers With The Screen 10-Key Pallet - Sanyo POA-PN03C Owner's Manual

How to enter the numbers with the screen 10-key pallet

1
Select a column with a red frame by using the point buttons 7 8 .
2
SELECT
Press button. The screen 10-key pallet appears on the screen.
3
By using the point buttons(d e 7 8), select numbers 0 to 9 and press
repeating the above to enter the complete number on the column.
* To change the number in a column, select "C" and press
the column and then enter the number again.
4
After entering the number in the column, select a move key (7 8 e d) located on the lower
part of the pallet by using the point buttons and press
the red frame.
5
Repeat steps 3 to 4 for entering all the network address.
6
After finishing, select "Exit" and press
screen.
10-key pallet
Exit
Installation and network configuration
SELECT
SELECT
SELECT
button. The 10-key pallet disappears on the
SELECT
button. By
button to clear the number in
button repeatedly to move
PJ-NET ORGANIZER
OWNER'S MANUAL [XP57 Series]