Control By The Computer - Sanyo POA-PN03C Owner's Manual

[1] Control by the computer

* PC provides the Network Capture.
PC1
Project this screen
image with PJ2.
PC3
Select input mode to "Network" previously.
1
Click Network Capture 3 icon on the task bar.
2
Click Start real time capture on the popup menu.
The screen image of the computer will appear on the
projected screen in real time.
• To stop capturing, click Stop real time capture on
the popup menu. The captured image of the com-
puter on the screen is frozen.
• To restart capturing, click Restart real time capture
on the popup menu.
3
To end capturing, click End real time capture on the
popup menu.
If the Network PIN code set on the projector dif-
fers from PIN code set on the parameter setting
up, The Pin code setting window appears. Enter a
correct PIN code and click Ok button.
If the error message appears, check item "Parameter set up" (+ p.71).
✐
PC2
PC2
Capture
PC4
PC5
PJ2 PJ1
PC6
Standby
OWNER'S MANUAL [XP57 Series]
Using the Real Time Capture
* Start capturing from
the PC1.
Icon on the task bar
Capturing
PJ-NET ORGANIZER
7