Setting Up The Projector - Sanyo POA-PN03C Owner's Manual

Setting up the projector

Click Setting on the main menu. This function is to set up the projector.
Select the sub menu [Screen setting] or [Setting] and then set up each set-
ting.
Item
Screen ..................... Switches the screen mode. (Normal, Wide, True,
Ceiling ..................... Sets the image top/bottom and left/right
Rear ........................... Sets the image left/right reversed. (ON, OFF)
✐ The mark "
selected input source system. The error message appears
when selecting the disabled screen mode indicated with "*".
Description
Full) There may not be available mode depending
on the input mode as shown in the table below.
reversed. (ON, OFF)
Input source
Screen mode Video Computer
Normal
4
Wide
4
True *
Full *
" means that the available screen mode in the
4
OWNER'S MANUAL [XP57 Series]
Setting up the projector
4
4
4
4
PJ-NET ORGANIZER