Sanyo POA-PN03C Owner's Manual page 44

Chapter 3 Basic Setting and Operation
[1]––––––––––––––––––––––––––––––––––
When PJ lamp is off.
o
When PJ lamp replacement time is reached.
o
When internal PJ power circuit is failed.
o
When internal PJ temperature is too high.
o
When PJ is turned into Standby in proper user opera-
o
tion.
[2]––––––––––––––––––––––––––––––––––
When Power management function turns PJ lamp
o
off.
When the signal is interrupted.
o
When Auto Play is failed.
o
When lamp Corres. Value reaches
o
[ ] hours.
Up to 99,999 hours can be set for the time setting.
✐
If condition "When Auto Play is failed" is checked, the trap is sent when occurring the error during the
✐
auto display operation using with the network viewer function (+p.98). For further information of the
error, refer to item "Auto Display setting and control page [3]"((+p.101).

Trap option
Trap option setting
Tick check boxes in front of the condition item to send the
trap.
Set
✐ Click button if you tick or un-tick the check box on a page.