CIAT Climaciat Instruction Manual page 15

ƒ Connecting the condensate drainage: See § 7.1 "Condensate drain siphons".
ƒ Heat exchangers with cylindrical threaded connectors with flat gaskets.
- Always use two spanners when connecting or tightening the hydraulic couplings to avoid twisting the pipes and applying
stress on the welds.
- Do not use zinc-coated or galvanised connectors or pipes.
- WARNING: Check the compatibility of the materials (risk of electrolysis).
ƒ Heat exchangers with threaded connectors. Screw flange or Victaulic type grooved connector adaptor kits are available
ƒ Heat exchangers with "Victaulic" type grooved connectors.
- Follow the instructions from the connector manufacturer when preparing and aligning the pipes.
- Do not use zinc-coated or galvanised connectors or pipes.
- WARNING: Check the compatibility of the materials (risk of electrolysis).
ƒ Heat exchangers with grooved connectors. Optional threaded connector or flange adaptor kits are available.
Connection types:
EN - 13
EN