Adjustable Feet And Support Cylinders - CIAT Climaciat Instruction Manual

ƒ Remove the lifting lugs and use a strap to bring the blocks together, taking care not to damage the front panel components.
When bringing the blocks together, make sure the various cleats (2) fit together correctly.
Finalise the assembly
(4) supplied in the kit.
ƒ Clip the covers onto the cleats (1).
Assembling the mixing option in 2 self-contained blocks.
- Fit a gasket on the 2 bearing faces of the insulated sleeve (sleeve supplied in the AHU).
- Affix the sleeve to the outside of the AHU against the mixing damper (4.8 x 19 sheet metal screw).
- Bring together the 2 blocks.
- Connect the sleeve to the 2nd block from the inside of the unit.
- Affix the panel to prevent access to the sleeve connection (4.8 x 19 sheet metal screw).

6.4 Adjustable feet and support cylinders

100, 200, 300 and 400 mm height foot
Adjustable foot
Adjustable foot with 100, 200, 300 and 400 mm riser
by screwing the connecting
Description
Remember to fit the feet halfway along the cross members for large blocks
cleats together
2
2
1. Remove the transport feet
2. Fit the risers supplied with the M8 screws included
1. Remove the transport feet
2. Screw the cylinders underneath the unit (nuts crimped into the frame)
1. Remove the transport feet
2. Fit the risers supplied with the M8 screws included
3. Affix the cylinders into the extension feet with M8 screws and nuts (nuts
crimped into the foot)
EN - 10
using the metric screw
4
Instructions
(3) + M8 nut
3
1